Menu

New FPGA, U-boot, and Linux image for TS-7250-V3


Notice Id: 182
URL: https://pcs.embeddedarm.com/notices/new-fpga-u-boot-and-linux-image-for-ts-7250-v3 Type: Firmware Update
Contains Board Revisions: No
Effective On: Oct 18, 2021
Published: October 18, 2021
Products Affected: TS-7250-V3


Dear Valued Customer,

We are contacting you today to notify you updates available for the TS-7250-V3, and a change in shipping software. A new FPGA, U-Boot, and Linux image are available.

The FPGA revision 45 update adds support for mikroBUS, and includes bug fixes to PC/104 & SPI. The mikroBUS header now includes SPI, I2C, PWM, ADC, and GPIO. This also enables all of the PC/104 pins to optionally be used as GPIO. For a detailed list of changes, and instructions to update, see:
https://docs.embeddedarm.com/TS-7250-V3#FPGA_Changelog

The latest U-Boot (20211014) is needed to support the clock required by the FPGA update:
https://docs.embeddedarm.com/TS-7250-V3#U-Boot_Changelog

The latest Debian 10 image update includes minor bug fixes, and includes an updated kernel to support the new FPGA features.
https://docs.embeddedarm.com/TS-7250-V3#Debian_Changelog

With this update there is also now Debian 11 Bullseye support.
https://docs.embeddedarm.com/TS-7250-V3#Debian_11_-_Getting_Started_and_writing_an_Image

New TS-7250-V3 orders will ship with the revision 45 FPGA, 20211015 U-Boot, and Debian 11 Bullseye.

These updates complete the planned FPGA development. Further FPGA changes will only occur for bug fixes.

Technologic Systems appreciates your business. If you have further questions or concerns, please contact us by either replying to this email or filling out the contact us form at https://pcs.embeddedarm.com/notices/new-fpga-u-boot-and-linux-image-for-ts-7250-v3.

Best Regards,

Technologic Systems
16525 East Laser Drive
Fountain Hills, AZ 85268
Phone: (480) 837-5200
Fax: (480) 837-5300


Contact Us

This site is protected by reCAPTCHA and the Google Privacy Policy and Terms of Service apply.