Dear Valued Customer,
We are contacting you today to offer guidance on the Migration from "32F" to "128F" for TS-7250. Technologic Systems previously notified customers
that the TS-7250 would be consolidating to the 128 MByte Flash
offerings. For a majority of applications this will have no impact to
the customers software or production processes. However there are a few
applications that will need a little more assistance, if your
application meets the guidelines below please contact us for further
details regarding the software transition requirements.
The affected products are: TS-7250
Most customers will not notice the 32MB to 128MB upgrade, however if the application requires the Linux Kernel that is shipped on the unit be replaced completely with a custom kernel there may be issues as the "128F" product requires a different kernel image to handle the differences in the hardware.
Please note: Most customer production mechanisms do not "re-image" or replace the pre-loaded kernel on the SBC.
To determine if a production process is replacing the kernel shipped on the unit, check for one of these signs:
1. Production process uses a TS-9420 Production Tool for SBC Flash Image Replication that modifies /dev/mtd/ or /dev/mtdblock/ devices 0, 2, 3, or 5
2. Production process forces the product to pause during boot in "RedBoot" and replaces the vmlinuz file (the kernel binary).
Technologic Systems appreciates your business. If you have further questions or concerns, please contact us by either replying to this email or filling out the contact us form at https://pcs.embeddedarm.com/notices/migration-from-32f-to-128f-for-ts-7250.
16525 East Laser Drive
Fountain Hills, AZ 85268
Phone: (480) 837-5200
Fax: (480) 837-5300